487
Environmental Conditions
Item Description
Operating Temperature
Continuous/Cutter/Tear-off/Partial cutter/Dispenser mode
0 to 35 °C (32 to 95 °F)
Linerless Cutter/Linerless Tearoff mode
5 to 35 °C (41 to 95 °F)
Storage Temperature
(Without Media)
-5 to 60 °C (23 to 140 °F)
Charging Temperature 0 to 35°C (32 to 95 °F)
Operating Humidity 30 to 75% RH (Non-condensing)
Storage Humidity (Without
Media)
30 to 90% RH (Non-condensing)
Print
Item Description
Print Method Direct thermal
Print Speed
With the AC adapter
2 to 6 inches/sec (50.8 to 152.4 mm/sec)
With the optional battery
2 to 4 inches/sec (50.8 to 101.6 mm/sec)
Resolution (Head Density) 305 dpi (12 dots/mm)
Non-printable Area Pitch direction (Excludes liner)
Top
1.5 mm (0.06")
Bottom
1.5 mm (0.06")
Width direction (Excludes liner)
Left
1.5 mm (0.06")
Right
1.5 mm (0.06")
Printable Area Length 500 mm (19.69") x Width 80 mm (3.15")