SATO FX3-LX - Page 488

Hardware
488
Item Description
Print End Position 1 to 6000 dots (1 dot=0.083 mm (0.0033"))
Print Darkness
Darkness level
1 to 10
Sensors
Item Description
I-mark (Reflective Type)
Position and sensitivity
Adjustable
Gap (Transmissive Type)
Position and sensitivity
Adjustable
Head Open/Cover Open Fixed
Paper End Sensor Detect with I-mark sensor or Gap sensor
Linerless Adjustable
• If the optional cutter kit or partial cutter kit is installed.
Dispenser Adjustable
Liner Fixed
• Specifications are subject to change without notice.