Page 63
STAT
IM
2000/2000S Service Guide
96-108639 Rev 3.0
3. Troubleshooting Cycle Faults
STATIM 2000/2000S/2000 G4 Service Guide
This allows you to identify the type of water pump fitted to any revision 7 unit without removing the
cover. No changes can be made to the pump type in this sub menu.
There are two specific pump types identified by this sub menu, the ULKA pump (fitted to later
machines) and the INVENSYS or SCICAN pump (fitted to earlier units).
The pumps are NOT interchangeable between units as the each pump requires type specific
software for the unit to operate correctly.
1. To return to the service menu, press the RUBBER & PLASTICS button.
2. To return to the operational menu, press the STOP key.
>Production cycle
This function is for manufacturing use only.
To Next Page
Loading...
