SciCan Statim 2000 - Page 66

Page 64
STAT IM 2000/2000S Service Guide
96-108639 Rev 3.0
3. Troubleshooting Cycle Faults
STATIM 2000/2000S/2000 G4 Service Guide
Calibration
Conductivity Setup
Water Cnd Tmp.
Comp.
Devices Test On/Off
Stored Printouts
Clear CF Printouts
Display Last CF#
Calibration Offsets
Repeater Mode
Cycle Number
Set Serial No.
Model No.
Factory Default
Lock Cycles
Firmware Upgrade
NVRAM Tools
Water Pump Type
Time
Date
DST On/Off
Recent Printouts
Time 12/24
Date Format
Language
Unit No.
Water Quality
Serial Number
Printer Type
Baud Rate
End of Line CR/LF
Printer user° char
Process Enforced
User
Themes
Screensaver
LCD Contrast
Network Setup
Button Beep
Beep Volume
Steri. End buzzer
Level
Air Drying (available
to non-S units only)
Reset
Local Control
Quality
Remote Access
Instructions
Country
Dealer ID
Test On/Off
Pump
Valve + Compressor
Drawer Relay
Extra 2L
Extra 1L
Yellow LED
Compressor
Valve