sennebogen 830 E - Check Fuel Level; Lubricating the Lubrication Points Manually

Start-up - Tests before start-up
4 - 10
830 / 07.2012
Original operating instructions
4.6.2 Check fuel level
Note
The fuel level can be determined as follows:
 by the SENNEBOGEN CONTROL system in the initial screen, see
Section 5.
Note
Fill the tank with the specified grade of fuel. Clean fuel is essential for
trouble-free operation of the diesel engine. See the label on the fuel
tank.
Note
Pay attention to the information in the maintenance instructions.
Notes on quality and fuel selection
Observe the notes in the engine manufacturer operating instructions.
4.6.3 Lubricating the lubrication points manually
Note
All attachments (e.g. grab) must be manually lubricated.
Note
Pay attention to the information in the maintenance instructions.
Note
More information can be found in Section 4.7 and Section 4.9.