sennebogen 830 E - Machine Labeling; USA Identification Plate

Safety - Machine labeling
1 - 5
07/2012
Original operating instructions
1.6 Machine labeling
The machine is provided with special warning and notice signs.
 Do not remove the signs.
 Ensure that all signs are undamaged and legible.
 Clean labels with soap and water if necessary, not with fuel or
solvents.
 Replace damaged, scratched or illegible signs with new ones.
Note
Signs are available from SENNEBOGEN (see Spare parts catalog).
1.6.1 USA identification plate
(*) Note
The data for positions 5, 6 and 7 is not always engraved on the Warning
and notice labels
1 Machine type
2 Manufacturer's No. (Facility No.)