SENCON - Sennebogen Control System - Settings/Parameterization
SENCON / 01.2013
5 - 33
5.4.8 ECO mode
ECO mode enables speed regulation, allowing you to operate the
machine more economically, if required. When starting the machine
ECO mode is activated.
ECO mode can be switched off via the quick-select button on the start
page. A brief click suffices. ECO mode can be switched on again in the
same manner.
Note on ECO mode
The speed of ECO mode is set at 1850 RPM.
WARNING
After the engine starts, the machine runs at idle speed with ECO mode
activated. When activating a function, the speed changes immediately
to the higher ECO mode speed.
CAUTION: Undesired jerky motions possible!
To Next Page
Loading...