sennebogen 830 E - Transport; Safety instructions

Transport - Safety instructions
7 - 1
830 / 07.2012
Original operating instructions
7 Transport
Preliminary tasks Transport the machine using a flatbed trailer. Carry out the following
preliminary tasks:
 Select a suitable transport vehicle.
Note the dimensions (Section 7.1.1) and weights (Section 7.1.3) of
the machine.
 Clean the machine.
 Place the boom and stick in the transport position.
 Lock the upper structure and undercarriage according to Section 7.1.5.
 Secure the outriggers in accordance with instructions.
 If necessary, take down attachments.
7.1 Safety instructions
WARNING
 In Germany:
Loading and transportation work is only to be carried out by
authorized specialist personnel in accordance with VBG 40, §48 and
Federal Motor Vehicle Safety Standards (StVo) §22.
 Observe relevant regulations for securing loads.
The respective transport operator is always responsible for
transporting the machine and accessories.
 When loading and transporting, secure the machine and its working
equipment from involuntary motions.
 Clean mud, snow and ice from undercarriage of machine so that
ramps can be accessed without danger of slipping.
 Provide flatbed trailer access ramps with wooden planks.
 Check the conditions of the route before starting the journey.
 Only transport the machine on intended securing and lifting points.
 Ensure that the machine does not present any hazards to other road
users.
 Wear personal protective equipment (e. g. protective helmet,
protective gloves, safety shoes).
 Report any damage that occurred during shipping to SENNEBOGEN
customer service immediately.