sennebogen 830 E - Protective features

Safety - Protective features
1 - 42 07/2012Original operating instructions
1.10 Protective features
DANGER
 Do not remove protective features or coverings.
 Always check that protective features are complete and properly
secured before starting the machine.
Protective features include engine flaps, doors, guard grills,
coverings, fire extinguishers and first aid kits.
 Replace all protective features and coverings properly on
completion of assembly or maintenance work.
 Exchange damaged protective features (1) for new ones.
Overload
Warning device
Illustration
DANGER
Danger of machine tipping!
Decrease the load immediately (e.g. decrease reach, lower load).
Limit shutdown
equipment
The following motions are limited by the limit shutdowns:
The overload warning device gives an acoustic warning signal if the
permitted lifting capacity is exceeded. Ensure that the overload
warning device is activated when working with lifting equipment.
The danger of tipping is not averted by the overload warning device!
–Retract stick
– Extend stick
–Hoist up
– Hoist down