Operation - Work application
6 - 48
830 / 07.2012
Original operating instructions
6.5.3 Emergency lowering — cab
Note
The emergency lowering feature still functions in the event of engine or
hydraulic system failure. The machine is equipped with the following
feature to lower the cab in an emergency:
Emergency lowering (in the cab)
Installation location: bottom right, next to the driver's seat.
Necessary e.g. in event of a fault in the drive system.
Emergency lowering (outside the cab) Location: Below the front left
service access door. Necessary in case the machine operator has
an emergency due to a health condition.
DANGER
Danger to life through shearing and crushing forces!
Ensure that no persons are within the danger area of the cab
suspension. The danger area is the area
On/under the cab
On/under the mechanical cab suspension.
Emergency lowering —
in the cab
1 Press lever (1) upwards. The cab lowers slowly.
2 Pull lever (1) back again after reaching the lower limit position.
1
Illustrated =
cab elevated
To Next Page
Loading...