Operation - Work application
6 - 78
830 / 07.2012
Original operating instructions
6.5.13Operation with the grab
Follow the following safety instructions:
WARNING
Risk of accident as a result of suspended loads!
Always lower the load when work is interrupted.
Never leave the driver's cab when a load is suspended.
Activate the overload warning device.
Do not carry out any form of work that will reduce the stability of the
machine.
Attachments (e.g. grab) and load elements can rock. Proceed with
extreme caution.
Observe the danger area.
The grab is opened/closed using the right control lever and swung
using the potentiometer on the left control lever.
1,2
E,F
Grab motions
1 Swinging, left
2 Swinging, right
Directions of movement:
E Open grab
F Close grab
To Next Page
Loading...