sennebogen 830 E - Overview of Functions

SENCON - Sennebogen Control System - Overview of Functions
SENCON / 01.2013
5 - 4
5.2 Overview of Functions
Below is a list of all SENCON functions.
Diagnostics
 Diesel Engine (Section 5.3.1)
 Hydraulics (Section 5.3.2)
 Cooling (Section 5.3.3)
 Average Values (Section 5.3.4)
 Service (Section 5.3.5)
 Active Errors/Error Memory/Acknowledge Errors (Section 5.3.6)
 Network (Section 5.3.7)
 Statistics (Section 5.3.8)
Settings/
Parameterization
 Diesel Engine (Section 5.4.1)
 Hydraulics/OptiMode (Section 5.4.2)
 Calibration (Section 5.4.4)
 Daily Hours Counter (Section 5.4.5)
 Display: Language, Date, Time, Brightness, Units (Section 5.4.6)
 Activate automatic idle (Section 5.4.7)
 Central lubrication (Section 5.4.3)
 ECO mode (chapter 5.4.8)
 Manual Fan Reversal (Section 5.4.9)
 Overload warning device (option) Section 5.4.10)
 Grapple rotational speed (Option) (Section 5.4.11)
Additional Information
 Indicator and Warning Lamps Overview (Section 5.5)