Operation - Operator's station/cab with gallery, raising
6 - 5
830 / 07.2012
Original operating instructions
6.2.1 Driver's seat
CAUTION
In order to avoid risk of an accident, check that all the settings are
properly locked in place before starting the vehicle.
The driver's seat adjustment mechanisms should not be actuated
during operation.
To prevent injury, no objects are to be stored within the pivot range
of the driver's seat.
Functionality testing should be performed at least as often as the
maintenance intervals of the vehicle.
Note
To prevent any possible damage to health, the weight setting should be
adjusted to match the weight of the individual driver prior to each
vehicle start-up and each time there is a change in driver.
Note
Bolt/screw connections should be checked regularly for solid seating.
Seat jiggling may be caused by loose bolt/screw connections or other
defects. If irregularities are found in the functionality of the seat (e.g. in
the spring of the seat), call an authorized professional immediately to
remedy the cause. Non-compliance leads to dangers for your health
and increased risk of an accident.
To Next Page
Loading...