Start-up - Switching on machine
4 - 33
830 / 07.2012 Original operating instructions
4.10.3 Seat belt / USA
The machine is equipped with a lap belt. The belt complies with
standards SAE J 386 (USA).
WARNING
Check belt for signs of wear before machine start-up. Immediately
exchange a damaged belt.
Clean dirty belt using water.
Do not twist belt when fastening.
Pass belt as low as possible around the hips, not around the
stomach.
1 Push metal catch (1) into belt buckle (2).
An audible click indicates that the belt has engaged.
2 To release belt, pull the black cap (3) upwards..
To Next Page
Loading...