sennebogen 830 E - Seat Belt; EU

Start-up - Switching on machine
4 - 32
830 / 07.2012
Original operating instructions
4.10.2Seat belt / EU
The machine is equipped with a lap belt. The belt complies with
standards FMVSS 209 (EU).
WARNING
 Check belt for signs of wear before machine start-up. Immediately
exchange a damaged belt.
 Clean dirty belt using water.
 Do not twist belt when fastening.
 Pass belt as low as possible around the hips, not around the
stomach.
1
Push metal catch (1) into belt buckle (2).
An audible click indicates that the belt has engaged.
2
To release belt, press red button (3) on belt buckle (2).
3
1
2