sennebogen 830 E - Mounting;disassembling the counterweight

Setup work - Mounting/disassembling the counterweight
9 - 4
830 / 07.2012
Original operating instructions
9.3 Mounting/disassembling the counterweight
Note
The mass of the counterweight is cast into its upper surface. The
counterweight can be disassembled to transport the machine.
Note
The counterweight must be assembled/disassembled by trained and
instructed technicians only!
DANGER
The machine can tip over. Without the counterweight, the machine is
not suitable for operation.
4
5
6
7
8
a
max. 90°
2
1
3
13