sennebogen 830 E - Moving the Machine

Operation - Work application
6 - 50
830 / 07.2012
Original operating instructions
6.5.4 Moving the machine
DANGER
Risk of accident as a result of incorrect use!
If the boom is positioned above the rear axle, the driving actions of the
machine are reversed. Proceed with extreme caution whenever you
wish to work or maneuver over the rear axle.
Driving with
a suspended load
Please note the following points when driving with a suspended load:
 Danger of tipping!
Keep loads as close as possible to the ground when moving.
 Always position the boom lengthwise to the undercarriage.
 Only carry 50% of the permitted safe working load.
 Mast (optional) — only drive the machine lengthwise and without
load.
 Only drive on even ground with sufficient safe working load.
 Reduce pendulum movements of the load by sensitive driving.
 Negotiate corners with as wide a radius as possible.
DANGER
Risk of accident as a result of incorrect use!
If the boom is positioned above the rear axle, the driving actions of the
machine are reversed. Proceed with extreme caution whenever you
wish to work or maneuver over the rear axle.
Note
A red indicator arrow (1) is located at the front of the undercarriage.
This can be seen through the right-hand cab window. It indicates that
the boom is over the front axle.
1