sennebogen 830 E - Transport

Safety - Safety instructions
1 - 41
07/2012
Original operating instructions
1.9.12 Transport
WARNING
 In Germany:
Loading and transportation work is only to be carried out by
authorized specialist personnel in accordance with VBG 40, §48 and
Federal Motor Vehicle Safety Standards (StVo) §22.
 Observe relevant regulations for securing loads.
The respective transport operator is always responsible for
transporting the machine and accessories.
 Use a flatbed trailer with sufficient useful load and size.
 When loading and transporting, secure the machine and its working
equipment from involuntary motions.
 Clean mud, snow and ice from undercarriage of machine so that
ramps can be accessed without danger of slipping.
 Provide flatbed trailer access ramps with wooden planks.
 Check the conditions of the route before starting the journey.
 Only transport the machine on intended securing and lifting points.
 Ensure that the machine does not present any hazards to other road
users.
 Wear personal protective equipment (e. g. protective helmet,
protective gloves, safety shoes).
 Report any damage that occurred during shipping to
SENNEBOGEN customer service immediately.