Operation - Work application
6 - 47
830 / 07.2012
Original operating instructions
Note
Do not move the cab to the uppermost/foremost limit position. Stop the
cab approx. 10 cm before the uppermost/foremost limit position. This
provides optimum damping characteristics and pleasant working
conditions in the cab.
1 Press the safety lever (see Section 6.3.2) forwards.
2 Switch the machine on as described in Section 4.10.4.
3 Push the rocker switch (2) forward.
The cab is extended (Cab out).
4 Push the rocker switch (2) backward.
The cab is retracted (Cab in).
Extending/retracting
the cab (optional)
To Next Page
Loading...