Start-up - Lubricating the machine manually
4 - 28
830 / 07.2012
Original operating instructions
4.9.3 Distributed manual lubricating points
mobile undercarriage
The mobile undercarriage has distributed lubricating points that must
be lubricated manually:
12x undercarriage support.
Undercarriage support Three grease nipples on each of the four supports must be lubricated
manually.
Note
When re-lubricating via grease nipples, press in grease until new
grease escapes at the lubricating point.
Lubricating specification (per grease nipple)
3.0 ccm / 40 operating hours
To Next Page
Loading...