Safety - Responsibilities of the employer
1 - 11
07/2012
Original operating instructions
Technical condition of
the machine
The employer has an ongoing responsibility to monitor the overall
technical condition (obvious external faults and damage as well as
changes to operational behavior) of the machine.
Do not operate the machine if a fault has been detected!
Observe mandatory time limits for routine checks.
All damages and incidents are subject to the mandatory logging and
storage regulations.
Independent conversion
and replacement part
production
For safety reasons the machine may not be modified or altered in any
way. This applies also to the installation and use of safety devices and
valves as well as welding on load carrying parts.
Genuine SENNEBOGEN replacement parts and accessories ensure
the safety of personnel. Parts and fittings from other manufacturers are
not tested by SENNEBOGEN and are not therefore approved. The use
of other components can alter the machine's characteristics and
present a safety hazard.
If other components are used, SENNEBOGEN will not be considered
liable for any resulting consequences.
Unauthorized operating
methods
The operating safety of the machine is only ensured if it is used as
intended according to these instructions.
The specified performance specifications must be observed.
The performance data listed in the instructions must not be
exceeded.
If a danger of heavy items dropping exists, the machine may only be
used if the driver's area is covered by a protective roof (FOPS). The
protective roof is optionally available from SENNEBOGEN.
Special dangers The machine operator must check whether the operation gives rise to
specific dangers, e.g. on account of toxic gases, ground quality etc.,
and adopt appropriate measures to avoid or limit those dangers.
International use If the machine is used internationally, the following must be observed:
Observe the safety regulations of the respective country.
Ensure that the operators have the necessary qualifications for the
intended work.
Ensure that the contents of these instructions are read and fully
understood. If necessary, obtain the instructions in the appropriate
official language from SENNEBOGEN.
To Next Page
Loading...