Setup work - Safety instructions
9 - 2
830 / 07.2012
Original operating instructions
WARNING
There may be dangers during operation to persons, the machine and
other property, if
The setting of the safety limit position sensor for “Retract stick” was
not adjusted for the attached tool
The attachment tools attached do not comply with the relevant
safety regulations
The attachment tools have not been approved by SENNEBOGEN
The attachment tools attached are found to be defective.
The machine operator is wholly liable for any damage or consequential
damage caused by tools!
This damage is excluded from the terms of the warranty issued by
SENNEBOGEN Maschinenfabrik GmbH.
To Next Page
Loading...