Important notes about the operating instructions
W - 7
Original operating instructions
830 / 07.2012
How is the manual
organized?
The manual is divided into 10 chapters:
1: Safety
Here you will find generally valid safety instructions and must always
be complied with.
2: Overview
The main components of the machine are presented in chapter 2.
3: Technical data
Here you will find basic information concerning the machine,
e.g. Working loads.
4. Start-up
Here instructions on daily start-up are provided.
5: SENNEBOGEN Control System
Here you will find information on the SENNEBOGEN Control
System.
6. Operation
Here you will find information on operating elements and work
deployment.
7. Transport
Dimensions and weights of the machine are found in chapter 7.
8: Troubleshooting
This chapter contains instructions on recognizing the causes of
faults and how to correct them.
9: Setup tasks
Chapter 9 provides information on optional work tools.
10: Appendix
Here you will find an index of and additional information, about the
magnet unit.
To Next Page
Loading...