ITC Operating mode
5.5 Assigning device parameters
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
99
The required data can be found in the basic information of the respective server in
Windows.
You also require:
– A working DNS server.
– Working DNS resolvers on the participating machines in the Kerberos realm.
Enter the IP address of the DNS server in the network settings of the Industrial Thin Client
under "DNS server", see section "The "Network" submenu (Page 92)".
• You specify the logon information for logging the device onto the server under "Domain"
(RDP, Citrix), "User" (RDP, Citrix, WinCC OA), and "Password".
With the connection to a Sm@rtServer with WinCC
Advanced (TIA Portal) V13 or higher, a
password length of more than eight characters is supported after the "Encryption"
checkbox is selected.
In WinCC OA, the "User" and "Password" fields are used for HTTP download of Runtime.
Logon in the WinCC OA logon screen is therefore not possible. A password is required to
assign a user name.
• If you select "Autostart connection", this client-server connection is automatically
established when the device is restarted or rebooted and after modified configuration
settings are saved. "Automatic start connection" only works when the "Display connection
(favorites)" flag is set for the connection.
-server connections
-server connections can be started at the same time. An error
message appears when a 6th connection is activated.
• If you select "Show connection (favorites)", this client-server connection will appear in the
taskbar under "Favorites". If the favorites contain 10 connections, you cannot add an
additional connection, and this option is no longer available.
If you deselect the option, the client-server connection is not visible to the operator and
can only be started by the administrator in the Start menu "Configuration > Connections"
via the "Test" button.
To Next Page
Loading...
