Siemens SIMOCODE pro

System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-49
11 Fau lt s (O PD)
For details: See "Display of all pending faults".
Fig. 1-28: Faults (OPD)
12 Error buffer (OPD)
For details: See "Reading out the device-internal error buffer".
Fig. 1-29: Error buffer (OPD)
13 Event memory, OPD (OPD above *E04* and BU2 above *E07*)
For details see "Reading out the device-internal event memory".
Fig. 1-30: Event memory, OPD
Trip T>
Overload + phase failure
Fault - 1
Fault - 21
8
Enabling circuit 0 ->1
DM1 = DM-F PROFIsafe
Event memory
DM1 = DM-F Local
7 6 5 4 3 2 1
PROFIsafe Address:
Enabling circuit 0 -> 1
...
DM1 = DM-F Local or DM-F PROFIsafe
Enabling circuit 1 -> 0
DM1 = DM-F Local or DM-F PROFIsafe