Siemens SINAMICS S120 - Page 615

Accessories
11.1 Shield connecting plates for power supply and motor cables
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
615
Example 2: 200 mm wide component with internal air cooling
Tools required:
● Screwdriver for fixing screws used
Table 11- 6 Installing the shield connecting plate to a 200 mm wide component using as an example internal air cooling
1. Loosen the lower screw. 2. Engage the shield connecting plate
into the screws and at the line/motor
connection
3. Attach the shield connecting plate by
pulling it to the left
4. Tighten the shield connecting plate.
Tightening torque: 6 Nm
Result: Installed shield connecting plate