Accessories
11.1 Shield connecting plates for power supply and motor cables
Booksize Power Units
616 Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Example 3: 300 mm wide component with internal air cooling
Tools required:
● Torx screwdriver T25 for shield connecting plate
Table 11- 7 Installing the shield connecting plate to a 300 mm wide component using as an example internal air cooling
1. Remove the screw. 2. Engage the shield connecting plate into the line/motor
connection
3. Tighten the shield connecting plate.
Result: Installed shield connecting plate
To Next Page
Loading...
