Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

The parameter number has the following syntax: pxxxx[0...n], rxxxx[0...n], cxxxx[0...n],
pxxxx.0...15 or rxxxx.0...15, cxxxx.0...15, pxxxx[0...n].0...15 or rxxxx[0...n].0...15,
cxxxx[0...n].0...15.
Ex
amples of representation in the parameter list:
• p... Adjustable parameters (read and write)
• r... Display parameters (read-only)
• c... Display parameters (read-only)
• p0972 Adjustable parameter 972
• p0489[0...2] Adjustable parameter 489, index0 to 2
• r0945 Display parameter 945
• r0196[0...255].0...15 Display parameter with index 0 to 255 and bit array from bit 0 to bit
15
• r5613.0...1 Display parameter 5613 with bit array from bit 0 to bit 1
• c8997[0...2] Display parameter 8997, index 0 to 2
Other examples of the notation in the documentation:
• p9563[1] Adjustable parameter 9563, index 1
• r0196[1].5 Display parameter 196, index 1, bit 5
• r0964[2] Display parameter 964, index 2
• p5611.1 Adjustable parameter 5611, bit 1
Parameter name
Sho
ws the parameter name in the long form.
Variant
Speci󹪝es the product variant for which the parameter is valid. This information is not
applicable if a parameter is the same for all product variants used in the parameter list.
• For parameters that displayed only once
– S200PN: The parameter applies to the S200PN converter only.
– S200BasicPN: The parameter applies to the S200BasicPN converter only.
• For parameters that dispalyed twice
– S200 Basic PN (EPOS load side, rotating), S200 PN (EPOS load side, rotating): The
parameter is used in the "rotary" axis type application only and applies to both the S200 PN
converter and the S200Basic PN converter.
– blank: The parameter is used in the "linear" axis type application only and applies to both
the S200PN converter and the S200Basic PN converter.
Data type
Each parameter is assigned one of the following data types:
• Integer8 I8 8-bit integer
• Integer16 I16 16-bit integer
• Integer32 I32 32-bit integer
• Unsigned8 U8 8-bit without sign
Appendix
A.3Parameters
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
692 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English