Parameter group
A paramet
er group contains parameters that are functionally associated with one another.
Unit
Shows the default unit of the parameter. For adjustable parameters, the unit is additionally
specied according to the values (Min, Max, Factory setting) in square brackets.
Min, Max, Factory setting
The parameter value "when shipped" is specied under "Factory setting" with the relevant
unit in square parentheses.
The value can be adjusted within the range dened by "Min" and "Max".
This information is not applicable for display parameters.
Min Minimum value of the parameter [unit]
Max Maximum value of the parameter [unit]
Factory setting Value when delivered [unit]
Description
Explanation of the function of a parameter.
Value
List of the possible values of a parameter.
Recommendation
Information about recommended settings.
Index
Indexed parameters represent the name and its signicance for each individual index.
The following applies to the values (Min, Max, Factory setting) of indexed adjustable
parameters:
• Min, Max:
The adjustment range and the unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specied with the unit to represent
all indices.
When the indices have dierent factory settings, they are all listed individually with the unit.
Bit array
For parameters with bit elds, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 0 and 1
• Function diagram (optional)
The signal is shown in the function diagram.
Appendix
A.3Parameters
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
694 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
To Next Page
Loading...
Need help?
General
