Siemens SINAMICS SIMOTICS S200 PROFINET - Page 733

Description: Displays the identi󹪝cation of the conv
erter. The drive internally comprises components, device and converter. Both
components require their own identi󹪝cation parameters according to PROFIdrive.
Index: [0] = Company (Siemens = 42)
[1] = Conver
ter type
[2] = Firmware version
[3] = Firmware date (year)
[4] = Firmware date (day/month)
[5] = PROFIdrive converter type class
[6] = PROFIdrive converter subtype class
[7] = Reserved
[8] = Reserved
[9] = Reserved
[10] = Firmware patch/hot 󹪝x
Dependency: See also: r0964
Note
Example:
r0975[0] = 42 --> SIEMENS
r0975[1] = 311 --> SERV
O converter type
r0975[2] = 602 --> 󹪝rst part 󹪝rmware version V06.02 (second part refer to index 10)
r0975[3] = 2023 --> year 2023
r0975[4] = 1706 --> 17th of June
r0975[5] = 1 --> PROFIdrive type class = 1 (axis)
r0975[6] = 8 --> PROFIdrive subtype class = 4 (application class)
r0975[7] = 1 --> 1 (󹪝xed value)
r0975[8] = 0 (reserved)
r0975[9] = 0 (reserved)
r0975[10] = 0 --> second part 󹪝rmware version (complete version: V06.02.00.00)
p0976 Reset all parameters
 Data type: Unsigned16 Visible in: Extended display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Ready for operation
Parameter group: Save & reset
 Unit: -
 Min:
0
Max:
1
Factory setting:
0
Description: Resets all drive system parameters to the factory settings.
Value: 0: Inactive
 1: Start to reset all parameters
NOTICE
Writing to parameters is inhibited during the reset operation.
Appendix
A.3Parameters
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 731