Siemens SINAMICS SIMOTICS S200 PROFINET - Page 772

p2497 LR dimension system physical velocity
S200 Basic PN (EPOS
Lastseite r
otierend),
S200 PN (EPOS
Lastseite rotierend)
Data type: Integer16 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Commissioning
Parameter group: Position control, Mechanics
 Unit: -
 Min:
0
Max:
18
Factory setting:
18
Description: Sets the physical unit for the velocities.
Value: 0: 1000LU/min (no dimension)
 18: °/s
p2498 LR dimension system physical acceleration
 Data type: Int
eg
er16 V
isible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Commissioning
Parameter group: Position control, Mechanics
 Unit: -
 Min:
0
Max:
11
Factory setting:
7
Description: Sets the physical unit for the accelerations.
Value: 0: 1000LU/s² (no dimension)
 6: m/s²
 7: mm/s²
 10: in/s²
 11: ft/s²
p2498 LR dimension system physical acceleration
S200 Basic PN (EPOS
Las
tseite r
otierend),
S200 PN (EPOS
Lastseite rotierend)
Data type: Integer16 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Commissioning
Parameter group: Position control, Mechanics
 Unit: -
 Min:
0
Max:
18
Factory setting:
18
Description: Sets the physical unit for the accelerations.
Value: 0: 1000LU/s² (no dimension)
 18: °/s²
Appendix
A.3Parameters
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
770 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB