Siemens SINAMICS SIMOTICS S200 PROFINET - Page 798

p2580 EPOS negative software limit switch
 Data type: FloatingPoint32 Visible in: S
tandard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Operation
Parameter group: Limit
 Unit: mm
 Min:
-2.1474828e+09 [mm]
Max:
2.1474828e+09 [mm]
Factory setting:
-2.1474828e+09 [mm]
Description: Sets the software limit switch, in the negative direction of travel.
Dependency: See also: c2578, c2579, p2581, c2582
p2580 EPOS negative software limit switch
S200 Basic PN (EPOS
Lastseite r
otierend),
S200 PN (EPOS
Lastseite rotierend)
Data type: FloatingPoint32 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Operation
Parameter group: Limit
 Unit: °
 Min:
-2.1474828e+09 [°]
Max:
2.1474828e+09 [°]
Factory setting:
-2.1474828e+09 [°]
Description: Sets the software limit switch, in the negative direction of travel.
Dependency: See also: c2578, c2579, p2581, c2582
p2581 EPOS positive software limit switch
 Data type: FloatingPoint32 Visible in: S
tandard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Operation
Parameter group: Limit
 Unit: mm
 Min:
-2.1474828e+09 [mm]
Max:
2.1474828e+09 [mm]
Factory setting:
2.1474828e+09 [mm]
Description: Sets the software limit switch, in the positive direction of travel.
Dependency: See also: c2578, c2579, p2580, c2582
p2581 EPOS positive software limit switch
S200 Basic PN (EPOS
Lastseite r
otierend),
S200 PN (EPOS
Lastseite rotierend)
Data type: FloatingPoint32 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or driv
e applications
Can be changed in the operating
stat
e:
Operation
Parameter group: Limit
 Unit: °
 Min:
-2.1474828e+09 [°]
Max:
2.1474828e+09 [°]
Factory setting:
2.1474828e+09 [°]
Appendix
A.3Parameters
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
796 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB