Section 06 REAR SUSPENSION
Sub-Section 02 (TORQUE REACTION SUSPENSION)
06-02-4
SOFTEST ADJUSTMENT
1. Supporting edge closest to hexagonal
2. Spring
The stiffest adjustment is reached when the sup-
porting edge of cam is the farthest to hexagonal
portion of cam.
STIFFEST ADJUSTMENT
1. Supporting edge farthest to hexagonal
CAUTION : Always turn the left side ad-
justment cams in a clockwise direction
and the right side cams in a counterclockwise
direction. Left and right adjustment cams must
always be set at the same position.
RH SIDE
LH SIDE
NOTE :
To quickly change rear cam position
without using any tool :
– Lay vehicle on its side.
– Unhook rear spring by hand from lower idler
wheel.
A05F0MA
1
2
A05F0NA
1
A05F0OA
A05F0PA
To Next Page
Loading...
