Section 08 BODY/FRAME
Sub-Section 02 (BODY)
08-02-3
CABLES
PIPING
NOTE:
Refer to proper
Parts Catalog
to find suit-
able clip part numbers.
◆
WARNING
Before installation, ensure that all cables are
in perfect condition. Properly install the ca-
ble ends and secure them in place. Pay at-
tention to route them properly, away from
any rotating, moving, heating, or vibrating
parts.
◆
WARNING
Always ensure that the fuel, vent, primer,
impulse, injection oil and rotary valve oil
lines are properly fixed to their connectors,
that they are not perforated or kinked and
that they are properly routed away from any
rotating, moving, heating or vibrating parts.
Also check for leaks. Replace if required.
To Next Page
Loading...
