4-126
PDW-700/V1 (E)
SERVICE Menu (4/4)
No. Page Setup Item F-SET ALL PRST SCN REF LENS STD Power OFF SVC
18 MEASURE MEASUREMENT OFF X XXXXInitial value X
MODE
MASTER BLACK 0 O OXO
MASTER GAIN(TMP)
Depends on
X XODepends on X
the switch
the GAIN
setting.
switch setting.
19 FILTER CTEMP FILTER CTEMP 1 3200 X XXXX
FILTER CTEMP 2 3200 X XXXX
FILTER CTEMP 3 3200 X XXXX
FILTER CTEMP 4 3200 X XXXX
20 BATTERY INFO TYPE ---- ______ _
MFD DATE D/M/Y -------- ______ _
CYCLE COUNT ----- ______ _
CAPACITY -----mAh ______ _
VOLTAGE --.-V ______ _
CURRENT ----mA ______ _
REMAINING(%) ---% ______ _
REMAINING(MIN) ---M ______ _
MODE ---- ______ _
STATUS ---- ______ _
21 HOUSE METER2 RESET METER EXEC ______ _
OPERATION 000000H ______ _
LASER 000000 ______ _
OPERATION (rst) 000000H ______ _
SPINDLE (rst) 000000H ______ _
LOADING (rst) 000000 ______ _
SEEK (rst) 000000H ______ _
22 FUNCTION AF DISPLAY OFF X XXXX
LIMIT
23 S/H DC S/H DC ADJ MODE OFF X XXXXInitial value X
TEST OUT SELECT VBS XTXOY when
R/G/B
S/H DC B Rch (1) 0 X XXXX
S/H DC B Gch (1) 0 X XXXX
S/H DC B Bch (1) 0 X XXXX
24 BOARD INFO SD REC & PB (DVP) O ______ _
24P REC & PB
Depends on
______ _
(DCPxx xx)*
the installed
board
PROCYON-V
Depends on
______ _
(DCPxx xx)*
the installed
board
TG VERSION
ROM Version
______ _
25 SERVICE FILE SVC FILE LOAD EXEC ______ _
SVC FILE SAVE EXEC ______ _
F.ID Blank XXXXXX
* : The board name to be displayed is the name of the board that is actually installed.
To Next Page
Loading...
