Working with the Tools Page Settings
Page 89
© Copyright 2021 Stratasys. All rights reserved.
Both the Remote Pause and the Remote Set Standby Mode are set to No at the factory. To
change the Remote Pause setting to Yes, press anywhere within the row; the Remote Pause
dialog displays.
Figure 62: Remote Pause
Setting the Remote Pause radio button to Yes allows for pausing the build via the GrabCAD
Print mobile application and a cellular phone. Once the build is paused, it cannot be restarted
remotely. The build restart must be physically performed on the printer.
The printer can also be remotely set to Standby mode using the Remote Set Standby screen
and the GrabCAD Print mobile application.
Figure 63: Remote Access Permissions Dialog
To Next Page
Loading...
