Printer Status Temperature Status
Page 141
© Copyright 2021 Stratasys. All rights reserved.
Temperature Status
Oven Temperature
The oven’s temperature can be viewed via the Maintenance page. To locate this information:
1. Press the Tools button within the Navigation Menu; the Tools page will be displayed.
2. Press the Maintenance button within the Tools page; the Maintenance page will be
displayed.
3. Locate the Chamber row within the page. The printer’s current and set point oven chamber
temperatures are displayed within this row.
Figure 35: Maintenance Page Oven Chamber Temperature
Head Temperature
To view temperature information pertaining to the model and support heads within the
Materials page:
1. Press the Materials button within the Navigation Menu; the Materials page will be
displayed.
2. The Display Area of this page contains two Head Status Icons, one corresponding to the
model head and the other corresponding to the support head. (See “Head Status Icons”
(page 22) for details). The head’s current temperature as compared to its set point
temperature is displayed within the lower portion of the icon.
To Next Page
Loading...
