Printer Status Software Version
Page 142
© Copyright 2021 Stratasys. All rights reserved.
3. Touching one of these icons on the screen will open that head’s Head Details page. The
same temperature information is displayed within this page for both the model and support
heads.
Figure 36: Materials Page Head Temperatures
Software Version
Version information for the software used to control the printer (Controller Software) can be
accessed via the Maintenance page:
1. To access the Maintenance page, press the Maintenance button within the Tools page
(see “Working with the Tools Page” (page 76)).
2. Locate the Update Software row within the page (see “Maintenance” (page 93)).
3. The printer’s Controller Software version information is displayed within the Update
Software row.
Figure 37: Controller Software Version Information
Controller Software is installed on a flash device located on the Controller board and
should not be confused with GrabCAD Print software, which is installed on the
workstation PC.
To Next Page
Loading...
