Stratasys F770 - Modeling Materials; Materials Used

Modeling Materials Materials Used
Page 37
© Copyright 2021 Stratasys. All rights reserved.
Modeling Materials
Materials Used
The F770 printer can use ABS and ASA modeling materials. QSR Soluble Release support
material is used in conjunction with all model materials.
Table 1 (page 37) lists the material types available for use with each printer model.
Table 2 (page 37) lists color availability by model material type.
Table 1: Available Materials
Printer Model Available Materials
F770 ABS and ASA
Table 2: Color Options
Material Type Solid Color Options
ASA Ivory
ABS Black