Safety Instructions Product Safety Signs
Page 2
© Copyright 2021 Stratasys. All rights reserved.
• Warnings and Cautions precede the paragraph to which they pertain.
• Notes follow the relative paragraph.
Product Safety Signs
Stratasys makes every effort to ensure that our printers are safe and reliable at all times.
However, there will be times when you must access areas of the printer where potentially high
voltages, hot temperatures, and/or moving mechanical components could cause severe injury.
Warning:
Indicates a potentially hazardous situation which, if not avoided, may result in injury
or death.
Caution:
Indicates a situation which, if not avoided, could result in damage to equipment.
Indicates additional information relative to the current topic.
Always read and adhere to safety statements, and be aware of the following safety
signs when you see them on the printer.
Warning Symbols Meaning Location Comments
Hot surface Beneath the oven door
Risk of burns. Do not touch
this surface after printing.
High voltage
On the ectrical panel
access doors, on the AC
board cover, and next to
the power inlet
Risk of electric shock.
Arc flash Next to the power inlet
Energy levels exist such
that there is the potential
for an arc flash occurring.
To Next Page
Loading...
