Basic Job Build Tasks Aborting a Build
Page 130
© Copyright 2021 Stratasys. All rights reserved.
2. The Pause button will toggle and instead display the Play button. To resume building, press
the Play button. A resume command will be sent to the printer instructing it to resume the
build (see Figure 23).
Figure 23: Build Paused
3. Once the build resumes, "BUILDING" will be displayed within the Build Status Display and
the Pause button will be displayed in its unselected state (see Table 3 (page 52)).
Aborting a Build
When the printer is building, you have the option of directly aborting the build. To do so:
The printer will not resume building instantaneously, please be patient.
If the oven door is open the part will not resume building immediately. Touch the
text displayed within the Notifications Display portion of the Build page to check
for any errors in order to troubleshoot this situation.
To Next Page
Loading...
