Stratasys F770 - Page 79

Working with the Materials Page Material Status Icons
Page 68
© Copyright 2021 Stratasys. All rights reserved.
will be displayed within the center of the Material Status Icons, depending on the state of the
material coil box. The Material Status Icons can appear in the following states (color usage,
highlighting, and descriptions apply to all icons):
Table 7: Material Status Icons - Icon States
Icon State Description
Empty (gray dashed border)
• Indicates the filament key is not inserted.
• User action required to load material and insert the
filament key. See “Loading Material” (page 3) for
instructions.
• Touching the icon in this state will display the Material
Details page.
Unusable (semi-solid red)
• Indicates that an error occurred when checking the data
on the material coil box’s memory chip. The material coil
box is unusable.
• User action required to replace the current material coil
box with a valid one. See “Handling/Storing Materials”
(page 14) and “Connecting Material Coil Box To Printer”
(page 4) for instructions.
• Touching the icon in this state will not display the
material’s Material Details page.
Invalid (red border)
• Indicates that the material coil box is invalid. Invalid
materials are materials not licensed or not compatible
with the associated head type.
• Material from the invalid material coil box cannot be
loaded. User action required to replace the current
material coil box with a valid one. See “Handling/Storing
Materials” (page 14) and “Connecting Material Coil Box
To Printer” (page 4) for instructions.