Symbol DS7708 - Page 172

7 - 4 DS7708 2D Vertical Slot Scanner Product Reference Guide
RS-232 Default Parameters
Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar
code(s) beginning in RS-232 Host Parameters on page 7-5.
NOTES See Appendix A, STANDARD DEFAULT PARAMETERS for all user preferences, hosts, symbologies,
and miscellaneous default parameters.
Table 7-1 RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard 7-7
Baud Rate 9600 7-11
Parity None 7-14
Check Receive Errors Enable 7-16
Hardware Handshaking None 7-17
Software Handshaking None 7-21
Host Serial Response Time-out 2 Sec 7-24
RTS Line State Low RTS 7-27
Stop Bit Select 1 Stop Bit 7-28
Data Bits 8-Bit 7-29
Beep on <BEL> Disable 7-30
Intercharacter Delay 0 msec 7-31
Nixdorf Beep/LED Option Normal Operation 7-34
Ignore Unknown Characters Send Bar Codes 7-36