Teledyne 100E - Page 240

APPENDIX A-2: Setup Variables For Serial I/O,
Revision B.3
Model 100E Instruction Manual
238 045150110 Rev B.3
Setup Variable Numeric
Units
Default Value Value Range Description
CLOCK_FORMAT — “TIME=%H:%M:%
S”
Any character
in the allowed
character set.
Up to 100
characters long.
Time-of-day clock format
flags. Enclose value in
double quotes (“) when
setting from the RS-232
interface.
“%a” = Abbreviated
weekday name.
“%b” = Abbreviated
month name.
“%d” = Day of month as
decimal number (01 to
31).
“%H” = Hour in 24-hour
format (00 to 23).
“%I” = Hour in 12-hour
format (01 to 12).
“%j” = Day of year as
decimal number (001 to
366).
“%m” = Month as decimal
number (01 to 12).
“%M” = Minute as decimal
number (00 to 59).
“%p” = A.M./P.M.
indicator for 12-hour
clock.
“%S” = Second as
decimal number (00 to
59).
“%w” = Weekday as
decimal number (0 to 6;
Sunday is 0).
“%y” = Year without
century, as decimal
number (00 to 99).
“%Y” = Year with century,
as decimal number.
“%%” = Percent sign.