Transtech SealCup Express - 23 Switching on the Machine; Mains Switch on; Control Unit on

Switching on the machine 113
23 Switching on the machine
23.1 Mains switch ON
Switch on mains switch B on the
mains supply module on the rear of
the machine (position 1).
23.2 Control unit ON
The following conditions must be met in order to switch on the control unit.
• The mains switch must be switched on.
• The STOP button must be unlocked.
• All external EMERGENCY STOP buttons (if present) must be unlocked.
• All external safety guards (if present) must be closed.
Pressing on the ON illuminated button turns on the control unit.
When the control unit is on, the ON illuminated button will light up.
The control unit is on.
max 250V~
B