Transtech SealCup Express - Pad Position Setting

Pad Assembly Screw Fastening 47
Inserting the pad coupling
Push the pad coupling together with the assem-
bled pad into the guide.
Fixing the pad coupling
Tighten the clamping screw
F on the pad coup-
ling.
13.3.3 Pad position setting
The pad position can be set with the pad sliding coupling.
Left / right movement
Unscrew clamping screws
B.
The pad can be moved to the left or right.
The line marks
C on the ruler indicate the posi-
tion.
Forward / backward movement
Unscrew clamping screw
D.
The pad can be moved forwards or backwards.
All clamping screws must be retightened following
the adjustment of the pad position.
0 123123
0 123123
F
0 123123
B
D
C