148 Admin Settings
27.11 Safety guard
The machine can be equipped with various safety guards.
The light curtain safety guard is activated using push button
B.
The two-hand operation safety guard is activated using push button
C.
Depending on the safety guard in place, the operation and functions of the machine will
differ.
See Chapter 21 "Safety guard" on page 103.
The circuit of the automation interface must correspond to the selected safety guard.
See Chapter 31 "Automation Interface" on page 161.
DANGER
Risk of injury in the event of incomplete safety equipment.
Incomplete safety equipment can lead to a situation where no reliable
deactivation of the machine movement can take place when reaching into
the work area of the machine. This can lead to serious injuries or death.
• Never operate the machine with incomplete safety equipment.
• Commissioning is prohibited until all required safety equipment has
been installed and the machine, including all additional components,
corresponds to the provisions of the Machine Directive.
CB
To Next Page
Loading...