Admin Settings 145
27.7.6 Sensors cleaning tape
Adjustable settings (push buttons C and E) see Chapter 26.7.6 "Sensors cleaning tape"
on page 134.
Lack of tape
The function for lack of tape can be activated using push button
B. For this the sensor
must be fitted and connected.
Push button
C can only be activated if push button B has been activated.
End of tape / torn tape
The function for end of tape / torn tape can be activated using push button
D. For this the
sensor must be fitted and connected.
Push button
E can only be activated if push button D has been activated.
Write protection
See Chapter 22.8.2 "Write protection" on page 112.
B
D
C
E
To Next Page
Loading...