Manual Mode 123
25.4 Pad cleaning
The desired function can be selected via the push buttons.
The push button for the selected function is displayed in green.
Settings push button
This calls up the settings for this function.
See Chapter 26.5 "Pad cleaning" on page 129.
25.4.1 Move pad cleaning
Press the Move pad cleaning B push button.
Press one of the push buttons to select the direction.
The push button for the selected function is displayed in green.
The green START symbol is displayed when the machine is ready to start.
The START illuminated button lights up when the machine is ready to start.
Pressing the START button moves the pad cleaning in the pre-selected
direction.
The pad cleaning will move to its end position in each case.
If the printer is not in the home position, the pad cleaning cannot be moved. A notification
displays the status.
The printer must then be initially moved to the home position.
See Chapter 23.3 "Home position" on page 114.
B
To Next Page