44 Pad Assembly Screw Fastening
13.3 Pad coupling without limit stop
B
Pad sliding coupling
C Pad coupling
D Pad base plate
E Pad
The pad base plate is equipped with an M6 insert
nut
F.
The insert nut serves the purpose of fastening the
pad on to the pad coupling.
The pad coupling is equipped with various bore-
holes.
Pads can be directly fastened onto the pad coup-
ling. Depending upon the machine design, a pad
spacer (spacer block) can be assembled between
the pad and the pad coupling.
B
D
E
C
F
To Next Page
Loading...